7. How to use "Setup"
Click the [Setup] button, and you will jump to the "Basic Setup" page. (The image above shows the "General Setup"
page.)
Click B Dial, B Answer, B Multipoint, B Audio, B General, B ISDN, B LAN or B SIP on the left part of the screen,
according to what you are setting up.
• To modify the attribute (only when "sonypcs" has been entered as the user name)
A Open the page whose attributes you want to modify.
B Modify the attributes.
C Click the [SAVE] button. After the modification is complete, the screen will return to the same page as you see in
step 1.
Note
Sometimes the screen may not go back to the previous page after modifying the "LAN" page. This is not a malfunction.
12
7. How to use "Setup"