Advertisement
Troubleshooting
To avoid risk of electrical shock, personal injury, or death, disconnect power before servicing, unless testing
requires it.
Service Cycle
This will be a quick check of all systems.
1. Lid locks.
2. Press Start\Pause.
3. Lid unlocks.
4. Open lid.
5. Close lid.
6. Press Start\Pause.
7. Lid locks.
8. Cold water bleach fill.
9. Bleach fill. Advance to next step if water is not
connected to machine.
10. Tumble using 48 rpm tumble for 10 seconds.
11. Hot fill.
12. Fabric softener fill. Advance to next step if
water is not connected to machine.
13. Drain.
14. Spin to 150 rpm.
15. Spin to 350 rpm.
16. Spin to 850 rpm.
17. Pump cycles on and off.
18. Coast to 0 rpm.
19. Lid unlocks.
If a failure occurs during the test, an error screen will
appear. Select OK to continue. The test will continue
depending on the nature of the failure.
©2005 Maytag Services
!
WARNING
Display Diagnostic Codes
Enter Service Mode to display diagnostic codes.
Diagnostic codes will be shown in the right pane as
shown.
Access Other Features
To view details about the software version and the
total cycle count, select the diagnostic code portion of
the screen. You will also be able to view details about
the number of cycles since a diagnostic code
occurred, if a code is logged.
7
16023174
Advertisement
