Dhcp Service - D-Link DPH-150S User Manual

Telnet Port
RTP Port Range
Start
RTP Port Quantity
Notice:
1) You need save the configuration and reboot the phone after set this page.
2) Please REBOOT the system if you modify the HTTP or telnet port
number (the new number should be greater than 1024).
3) If you set 0 for the HTTP port, it will disable HTTP service.

DHCP SERVICE

8.3.2.5
authentication certification into the phone, then
set web browser port, the default is 443 port, if you
want to enhance system safety, you'd better change it
into non-443 standard port. You can access to the web
in https after rebooting the phone.
Set Telnet Port, the default is 23. You can change the
value into others.
Example: The IP address is 192.168.1.70. The telnet
port value is 8023; the accessing address is telnet
192.168.1.70 8023.
Set the RTP Start Port. It is dynamic allocation.
Set the maximum quantity of RTP Port, the default is
200.
DHCP SERVICE