Time&Date - D-Link DPH-150S User Manual

Field name
DHCP Lease Table
Shows the DHCP Lease Table， the unit of Lease time is Minute.
Lease Table Name
Start IP Address
End IP Address
Subnet Mask
IP Gateway
Leased Time
DNS Server
Address
Select name of lease table, click the Delete button will delete the selected
lease table from DHCP lease table.
Enable
DNS Relay
Notice:
1) The size of lease table cannot be larger than the quantity of C network IP
address. We recommend you to use the default lease table and not modify it.
2) If you modify the DHCP lease table, you need save the configuration and
reboot.
TIME&DATE
8.3.2.6
Setting time zone and SNTP (Simple Network Time Protocol) server according to
your location, you can also manually adjust date and time in this web page.
explanation
IP-MAC mapping table. If the LAN port of the phone
connects to a device, this table will show the IP and
MAC address of this device.
Specify the name of the lease table.
Set the start IP address of the lease table.
Set the end IP address of the lease table, the network
device connected to LAN port will get IP address
between Start IP and End IP by DHCP.
Set the Netmask of the lease table.
Set the Gateway of the lease table.
Set the Lease Time of the lease table.
Set the default DNS server IP of the lease table; Click
the Add button to submit and add this lease table.
Select DNS Relay, the default is enabled. Click the
Apply button to become effective.