Configure Your Ip Phone For Service - D-Link DPH-400S User Manual

Section 2 - Installation

Configure your IP Phone for Service

You have to configure the phone before operation. Usually the configuration is done by an office administrator, system supplier (such as a System
Integrator), or the service provider (such as an ITSP- Internet Telephony Service Provider). If you are a general user, please consult them for
support. For the advanced or experienced user, you may refer to the section of this manual about configuration through the web for information on
how to configure all the settings of the IP phone.
Now, if the IP phone is already connected to the network and the VoIP service is activated, please follow the following chapters for a guideline on
operating the phone.
The menu to configure your IP Phone is as follows:
You can navigate through the menu with the navigator control keys . The following sections will describe how you can setup your IP Phone
through this menu.
D-Link DPH-400S(SE) User Manual 16