D-Link DPH-150S User Manual page 34

Please select the proper network mode according to the network condition.
DPH-150S/DPH-150SE provide three different network settings:
 Static: If your ISP server provides you the static IP address, please select
this mode, and then finish Static Mode setting. If you don't know about
parameters of Static Mode setting, please ask your ISP for them.
 DHCP: In this mode, you will get the information from the DHCP server
automatically; need not to input this information artificially.
 PPPoE: In this mode, you must input your ADSL account and password.
You can also refer to 2.2.1 Network setting to speed setting your network.
Obtain DNS server
automatically
If you use static mode, you need set it.
IP Address
Subnet Mask
IP Gateway
DNS Domain
Primary DNS
Secondary DNS
If you uses PPPoE mode, you need to make the above setting.
Service Name
User
Password
Notice:
1) Click "Apply" button after finished your setting, IP Phone will save the
setting automatically and new setting will take effect.
Select it to use DHCP mode to get DNS address, if
you don't select it, you will use static DNS server. The
default is selecting it.
Input the IP address distributed to you.
Input the Netmask distributed to you.
Input the Gateway address distributed to you.
Set DNS domain postfix. When the domain which
you input cannot be parsed, phone will automatically
add this domain to the end of the domain which you
input before and parse it again.
Input your primary DNS server address.
Input your standby DNS server address.
It will be provided by ISP.
Input your ADSL account.
Input your ADSL password.