Creating A Memo Program - T+A SACD 1260 R User Manual

Creating a MEMO program

Explanation:
A MEMO program can store up to 20 tracks of a CD in
any sequence, e.g. for making a cassette recording. The
MEMO program can only be created for the CD currently
in the machine. It remains stored in the CD player until
either you erase it or the CD drawer is opened.
Note:
For SACDs the programming feature is not available
Procedure:
A CD must be inserted and the player must be in STOP
mode before the programming mode can be entered. In
STOP mode the screen displays the message 'STOP'
followed by the total number of tracks on the CD.
Activate MEMO programming.
•
Long keypress on the 
panel or the   -button of the remote control.
 
The screen shows: 'PROG' and a flashing number as
an invitation to enter information.
Press the   respectively the 
 
•
the number of the desired track lights up on the
display behind the 'PROG' message.
Now store the track in the MEMO program by
•
pressing the   button briefly.
 
Playing back a MEMO program
The MEMO program can now be played back.
Start playback process
•
Playback begins with the first track of the MEMO
program.
Erasing a MEMO program
Pressing the   button briefly in STOP mode opens
 
the CD drawer, and this action erases the MEMO
program.
A MEMO program can also be erased without opening
the CD drawer:
Activate MEMO programming in STOP mode.
•
Perform a long keypress on the 
front panel or the   -button of the remote control
 
Then again execute a long keypress on the 
•
button on the front panel or the 
remote control
 -button on the front
 
 button until
 
 button
  
 -button on the
 
 -
 
 -button of the
 
The title number flashes once to confirm that this track
has now been accepted as the first track in the MEMO
program. Select all the other tracks you wish to include in
the same way, storing each by pressing the 
button briefly.
Note:
The track you wish to select can also be entered directly
using the numeric buttons instead of the 
 buttons. After entering a number you can store
  
the track in the usual way by pressing the 
briefly.
When you have stored the 20th track the screen shows
the message 'FULL'. If you enter a further number, the
last stored track - the previous 20th one - will be
overwritten.
After you have stored all tracks in the MEMO program,
end the programming procedure as follows:
End MEMO programming.
•
Hold the 
the   -button of the remote control

The screen shows the message 'STORED', followed by
the message 'MEMO' and the number of stored tracks.
While the MEMO program is running, the 
 buttons select the previous and next tracks
  
respectively, but only within the MEMO program.
The screen now shows the message: '
The MEMO program is now erased.
37
 and
 
 button
 
 -button on the front panel or
 

pressed in for about 1 second
 and
 
'.
CLEARED CLEARED CLEARED CLEARED

 