T+A SACD 1260 R User Manual page 35

Controlling the mechanism
 Selects the previous track during playback.
 Starts playback, selects the next track during
playback.
 Fast rewind to search for a particular
passage.
 Fast forward to search for a particular
passage.
After about 2 seconds the outputsignal is
muted.
During the search process the elapsed time
for the current track is shown on the left-hand
side of the screen. If the search reaches the
start or end of the CD, it halts.
 Ends playback;
message: 'STOP'.
Opens and closes the CD drawer to STOP
mode.
 Pressing the  button briefly during
playback interrupts the current track; the
screen shows the message: 'PAUSE'.
A second press on the  button, or
pressing the
playback.
Starts playback.
   
This button is used to store a MEMO
program. If you are operating the menu
control system the 
as a confirmation button.
Brief press:
   
Selects the playback modes RPT TRACK /
RPT DISC / RPT PROG / RPT OFF
Long press:
Switch Mix mode on and off
Subsequent brief press:
Selects Mix mode MIX / RPT MIX
Brief press:
       
Selects the digital filter (see 'Front panel
controls,   ')
 
Long press:
A long press toggles between normal and
inverted signal phase (see 'Front panel
controls,   ').
 
Brief press:
     
 
Switches between CD and SACD layer (see
'Front panel controls, 
the screen shows the
button, resumes
   
 button is also used
 
 ')
 
Selecting tracks by number
Numeric buttons
   
Numeric input for direct selection of a track
 
 
number.
When you press a numeric button (e. g.
   
 ) the screen shows the message:

 
.
.
.
For a period of about 3 seconds a marker
.
flashes. During this time you may
.
press a second numeric button to
   
•
complete a two-digit track number - the
machine
immediately.
or press the 
•
assumed to be a single-digit track
number – the machine plays the selected
track immediately.
If you do not press a second button and
•
the 3-second period is over, the input is
assumed to be a single-digit track
number - the machine plays the selected
track.
Note:
Even when the CD drawer is open a track
number can still be entered directly. The
drawer then
playback starts with the selected track.
35
'SELECT 1-'.
plays the selected track
 button; the input is
 
closes automatically and