OPERATING INSTRUCTIONS: BELT-PACK TRANSMITTER
Transmitter Mute:
The MUTE switch turns the transmitter's audio signal on
or off. The audio is OFF when the RED LED is flashing.
Gain Adjust:
When changing microphones or
users, it may be necessary to adjust
the transmitter gain based on
differing microphones sensitivities
and voice levels.
To adjust the gain:
1. Open the battery compartment
door by depressing the latches
on each side of the transmitter.
2. Turn the MT dial clockwise
to increase the gain and
counterclockwise to decrease
the gain.
NOTE: If you are using a high impedance source, such as a guitar, it will be
necessary to adjust the GT dial. Using a high impedance source requires a
special cable. Contact Lightspeed Customer Service at 800-732-8999 for more
information.
17 | Delta X6 User Manual
D e l t a X 6 U s e r M a n u a l