Ceronix 1493 Service Manual page 104

INSTALLATION of the
ISO XFR-75W, ISO XFR-100W
ISOLATION TRANSFORMERS.
The ISO XFR-75W/-100W MUST be grounded by mounting
on a grounded, conductive surface via at least two screws.
Mains power and ground connections must be made before
WARNING:
power is applied to the ISO XFR-75W or the ISO XFR-100W
Isolation Transformers.
WARNING: FOR CONTINUED SAFETY, REPLACE SAFETY CRITICAL
COMPONENTS ONLY WITH MANUFACTURER'S RECOMMENDED PARTS (REFER
TO SERVICE LITERATURE).
AVIS: POUR MAINTENIR LE DEGRE DE SECURITE DE L'APPAREIL NE
REMPLACER LES COMPOSANTS DONT LE FONCTIONNEMENT EST CRITIQUE
POUR LA SECURITE QUE PAR DES PIECES RECOMMANDEES PAR LA
FABRICANT (CONSULTER LE GUIDE DE DEPANNAGE).
120
CERONIX CHASSIS.
Connector:
AC Line or
neutral
AC Line
Mains power.
Preferred
orientation for
optimum cooling.