UTStarcom F1000 Getting Started page 64
Hide thumbs
Also See for F1000:
- User manual (86 pages) ,
- Handbook (79 pages) ,
- Quick start manual (20 pages)
Table of Contents
Advertisement
Menu
4.5.4.1 SIP
WiFi-Settings Signal Protocol SIP
This option enables you to set the SIP protocol. The following options are
available
When you highlight one of these options, its current setting will be
displayed in the adjacent bubble
SIP Register Server Mode
Select this option to set the SIP register server mode
After accessing this option, you can select IP or DNS
SIP Register Server Domain Name
Select this option to set the SIP register server domain name
After accessing this option, enter the domain name, and press the left soft
key
(Ok) to complete the operation
SIP Register Server IP Address
Select this option to set the SIP register server IP address
After accessing this option, key in the IP address, and press the left soft
key
(Ok) to complete the operation
SIP Register Server Port
Select this option to set the SIP register server port
After accessing this option, key in the port number, and press the left soft
key
(Ok) to complete the operation
60
Keison Products www.keison.co.uk sales@keison.co.uk Tel: +44 (0)1245 600560
Advertisement
Table of Contents
Need help?
Do you have a question about the F1000 and is the answer not in the manual?