Related Manuals for KT&C KEZ-c2TR28V12XIR
Summary of Contents for KT&C KEZ-c2TR28V12XIR
- Page 1 KEZ-c2TR28V12XIR HD-TVI 1080p Varifocal IP66 Super Beam IR True WDR Turret Cameras with OSD, CVBS Output and UTC Control Quick Operation Guide...
-
Page 2: Regulatory Information
KEZ-c2TR28V12XIR HD-TVI WDR VF XIR Turret Camera·Quick Operation Guide Thank you for selecting this KT&C Omni EZHD Series product. For additional information please refer to the complete User Guide for this cameras series. End users should contact their KT&C Certified Dealer for service. - Page 3 KEZ-c2TR28V12XIR HD-TVI WDR VF XIR Turret Camera·Quick Operation Guide the user will be required to correct the interference at his own expense. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
-
Page 4: Safety Instructions
KEZ-c2TR28V12XIR HD-TVI WDR VF XIR Turret Camera·Quick Operation Guide which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info... - Page 5 KEZ-c2TR28V12XIR HD-TVI WDR VF XIR Turret Camera·Quick Operation Guide ● In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Please refer to technical specifications for detailed information.
- Page 6 KEZ-c2TR28V12XIR HD-TVI WDR VF XIR Turret Camera·Quick Operation Guide If the camera will not be used for an extended period, please protect the lens openings from damage and/or debris. ● Avoid aiming the camera at the sun or extremely bright light sources.
-
Page 7: Appearance And Description
KEZ-c2TR28V12XIR HD-TVI WDR VF XIR Turret Camera·Quick Operation Guide or maintenance by yourself. (KT&C shall not assume any responsibility for problems caused by unauthorized repair or maintenance.) Table of Contents 1 Appearance and Description ............7 2 Installation ..................8 3 Camera Connection &... -
Page 8: Installation
KEZ-c2TR28V12XIR HD-TVI WDR VF XIR Turret Camera·Quick Operation Guide output is desired, Digital WDR is an OSD menu option. WDR status is easily controlled by connecting together (or disconnecting) the bare ends of the ‘switch cable’ (if WDR was ON, connecting the wires will turn it OFF;... - Page 9 KEZ-c2TR28V12XIR HD-TVI WDR VF XIR Turret Camera·Quick Operation Guide If the IR LED in this camera will be active, you must observe the following precautions to prevent IR reflection: ● Dust or grease on the lens/dome cover will cause IR reflection.
- Page 10 KEZ-c2TR28V12XIR HD-TVI WDR VF XIR Turret Camera·Quick Operation Guide Figure 2-2 Separate the Camera from the Mounting Base Connect the power and video wires. Place the camera onto the mounting base and secure with the enclosure/outer housing. Figure 2-3 Place camera body and enclosure into base...
- Page 11 KEZ-c2TR28V12XIR HD-TVI WDR VF XIR Turret Camera·Quick Operation Guide Adjust the camera direction: Adjust the pan angle [P] of the camera [0~360°]. Adjust the tilt angle [T] of the camera [0~75°]. Rotate the body [R] 0~360° so that the image is upright.
-
Page 12: Camera Connection & Focus
KEZ-c2TR28V12XIR HD-TVI WDR VF XIR Turret Camera·Quick Operation Guide 3 Camera Connection & Focus Figure 3-1 Camera Connection Note: True WDR processing and downscaling from 1080p to CVBS both demand significant processor resources. CVBS output and digital zoom are disabled when True WDR is active; where full time CVBS output is desired, Digital WDR is an OSD menu option. - Page 13 KEZ-c2TR28V12XIR HD-TVI WDR VF XIR Turret Camera·Quick Operation Guide Or, to view the camera video, connect the camera BNC output to an EZHD Series DVR and observe the video via the monitor output, or over a network connection (web browser, OMNI CMS or OMNI Remote smart phone app).
-
Page 14: Osd Menu Operation
KEZ-c2TR28V12XIR HD-TVI WDR VF XIR Turret Camera·Quick Operation Guide 4 OSD Menu Operation The OSD menu can ONLY be accessed via the HD-TVI connection “Up the Cable” from an EZHD recorder. UTC control will not be available when using the CVBS connection. - Page 15 KEZ-c2TR28V12XIR HD-TVI WDR VF XIR Turret Camera·Quick Operation Guide If the HDCAM-C UTC protocol is already selected, clicking on IRIS + will bring up the OSD menu. To set/verify the protocol click on “Configuration” to bring up the detailed PTZ configuration screen.
- Page 16 KEZ-c2TR28V12XIR HD-TVI WDR VF XIR Turret Camera·Quick Operation Guide Once HDCAM-C has been selected, click OK, then using the PTZ controls click IRIS+ to bring up the camera OSD menu. NOTE: While the EZHD DVRs can display the CVBS image from the camera, Up-the-Cable control is only active on the HD-TVI video cable from the camera.
- Page 17 KEZ-c2TR28V12XIR HD-TVI WDR VF XIR Turret Camera·Quick Operation Guide...
- Page 18 KEZ-c2TR28V12XIR HD-TVI WDR VF XIR Turret Camera·Quick Operation Guide...
Need help?
Do you have a question about the KEZ-c2TR28V12XIR and is the answer not in the manual?
Questions and answers