2-2 Operation of the Blower-fan Unit
Switching the Blower-fan Unit On
The blower-fan unit has no power switch. You switch the blower-fan unit on and off via settings made on the printer.
When you're using the blower-fan unit, set the printer's [BLOWER FAN] menu item to "ENABLE." When this menu
item is set to "ENABLE," the blower fan comes on at the same time when printing starts. When printing ends, the
blower fan stops automatically.
Procedure
MENU
HEATER MENU
HEATER MENU
BLOWER FAN
BLOWER FAN
DISABLE
W 1346mm
SETUP SHEET
ROLL
When this unit is removed, use the procedure described to set the [BLOWER FAN] menu item to "DISABLE."
28
Chapter 2 Operation
Press
Press
Press
Press
Press
Use
ENABLE
Press
Press
Press
.
several times.
.
.
.
to select "ENABLE."
.
.
to go back to the original screen.