1-5 Connecting the Cables
Connecting the Cables
WARNING
WARNING
WARNING
Connect the cables for the drying-heater unit and the blower-fan unit, and the power cord.
Blower-fan unit
cable
Drying-heater unit
The printer and the drying-heater unit require
separate high-amperage electrical outlets.
Connect the two power cords to outlets on
separate systems. Also, make sure that the
electrical outlets meet the machine's ratings.
24
Chapter 1 Introduction
Connect to an electrical outlet that complies with this machine's ratings (for volt-
age, frequency, and current).
Incorrect voltage or insufficient current may cause fire or electrical shock.
Connect to ground.
This can prevent fire or electrical shock due to current leakage in the event of malfunc-
tion.
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
Blower-fan unit
Power cord
Power connector
Drying-heater unit cable
Drying-heater unit
connector
Drying-heater
unit cable
Electrical outlet
Blower-fan unit
connector
Blower-fan
unit cable