1-1 About This Machine
What's the DU-740/640/540?
This is an auxiliary drying unit for SOLJET Pro III series printers that combines a drying-heater unit and a blower-fan
unit. It uses the drying-heater unit to dry the ink by warming the media after printing. It also uses the blower-fan unit
to dry the ink by blowing air against the surface of the media.
An electrical outlet separate from that for the printer is required in order to use the drying unit.
Compatible Printers (As of September 2007)
SOL JET PRO III
➢The printer and the drying-heater unit require separate high-amperage electrical outlets. Connect the two power
cords to outlets on separate systems. Also, make sure that the electrical outlets meet the machine's ratings.
16
Chapter 1 Introduction
XJ and XC series
Auxiliary drying unit
DU-740
DU-640
DU-540
Compatible printers
Printers supporting widths up to 74 inches
Printers supporting widths up to 64 inches
Printers supporting widths up to 54 inches