Table of Contents
Advertisement
To talk to the selected key assignment, press and hold the SELECT control. This will also add the
name to the call list for future use.
To assign the selected key assignment to an intercom key on the active setup page, press and hold
the SELECT control, then tap an intercom key.
If restrictions against key assignment have been imposed using the intercom system
configuration software the intercom key may ignore the assignment. In this case, contact the
intercom system administrator if you need to make a change.
New key assignments created from the key list are automatically uploaded to the intercom
system and saved to the on-line configuration.
When you make a key assignment from the key list, both the talk and listen assignments will
be copied to the new key.
To return to the top-level menu, double-click the SELECT control. If no action is taken for about
30 seconds, the call waiting window will clear.
6.6
TOP LEVEL MENU, LEVEL
LEVEL displays crosspoint listen levels for point-to-point or party line key assignments. When
you click on LEVEL the call waiting window will display "TAP KEY". Tap any key that has a
point-to-point or party line listen assignment. The current listen level setting will display in the
call waiting window. If the key is not a point-to-point or party line key, or if there is no listen as-
signment, the call waiting window will display N/A when you tap the key.
Double-click the SELECT control and tap another key to read its level. Or, press and hold the SE-
LECT control for about 2 seconds to exit.
6.7
TOP LEVEL MENU, LISTS
6.7.1
TOP LEVEL MENU, LISTS, ICOM
ICOM displays only if your intercom system is connected to other intercom systems. When you
click on ICOM, a list of intercom systems will appear in the call waiting window. Rotate the SE-
LECT control to display the desired intercom system, then click the SELECT control. The call
waiting window will display WAIT while the scroll lists are retrieved from that intercom system.
Once the lists have been retrieved, you may use them just like the scroll lists for the local intercom
system. See the descriptions for IFB, ISO etc., that follow.
6.7.2
TOP LEVEL MENU, LISTS, PL (PARTY LINES)
When you click on PL, the list of party lines is displayed in the call waiting window. Rotate the
SELECT control to locate the desired party line.
To talk to the selected party line, press and hold the SELECT control.
To assign the party line to an intercom key for future use, press and hold the SELECT control,
then tap an intercom key.
If restrictions against key assignment have been imposed using the intercom system
configuration software the intercom key may ignore the assignment. In this case, contact the
intercom system administrator if you need to make a change.
22 User Manual, DKP-8, DKP-12 and KP-12 Keypanels with Push-button Keys
Advertisement
Table of Contents
