Sophos SG 210 Operating Instructions Manual
Hide thumbs
Also See for SG 210:
- Quick start manual (22 pages) ,
- Mounting instructions (12 pages) ,
- Mounting instructions (4 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sophos SG 210
Summary of Contents for Sophos SG 210
-
Page 1: Operating Instructions
Operating Instructions SG 210/230/310/330... -
Page 2: Security Symbols
Operating Instructions Foreword We are pleased to welcome you as a new customer of our Sophos SG appliances. To install and configure the hardware appliance you can use the following documents: Ì Hardware Quick Start Guide: Connection to the system peripherals in a few steps Ì... -
Page 3: Operating Elements And Connections
Operating Instructions CE Labeling, FCC and Approvals The SG 210/230/310/330 appliances comply with FCC Class A, CE, C-Tick, VCCI and UL. Important Note: For computer systems to remain CE and FCC compliant, only CE and FCC compliant parts may be used. Maintaining CE and FCC compliance also requires proper cable and cabling techniques. - Page 4 Ports not operational LCD and Control Keys The Sophos SG 210/230/310/330 units have an LCD and an operating unit with four membrane keys. In the LCD, 16 characters per line can be displayed. The display contains in three cycling views information on the hardware and specific system states.
-
Page 5: Change Ip Address
7. After the last digit is modified press the Enter key. The following message will be displayed: Netmask 8. Press up and down keys to increment or decrement the netmask value. 9. Press Enter to save the changed IP address and netmask. SG 210/230/310/330... - Page 6 The following message will be displayed: All Data Erased! Are you sure? With the up/down keys you can select Yes (y) or No (n). 4. Press the Enter key to confirm your settings. The factory reset action will now start. SG 210/230/310/330...
-
Page 7: Putting Into Operation
Scope of Supply The supplied parts are indicated in the Hardware Quick Start Guide. Mounting Instructions The SG 210/230/310/330 appliances are designed for use in racks. Please consider the following security tips: Important Note: Functional reliability outside of a rack cannot be guaranteed. -
Page 8: Rack Precautions
Reliable grounding must be maintained at all times. Ì To ensure this, the rack itself should be grounded. Particular attention should be given to power supply connections other than the direct connections to the branch circuit (i.e., the use of power strips, etc.). SG 210/230/310/330... -
Page 9: Rack Mounting Instructions
How to connect the appliance is described in the Hardware Quick Start Guide. For configuration you can follow the initial setup wizard described in the WebAdmin Quick Start Guide or cancel it and perform a manual setup (see the Sophos UTM Administration Guide). - Page 10 IEEE 802.3 - 10 Gbit/s via fiberglass. Single-mode fiberglas cover a distance of approximately 10 km Note: The SFP+ ports of the Sophos FleXi Port modules are dual-rate capable supporting both 1GbE and 10GbE speeds when using appropriate GBICs also supporting both rates.
-
Page 11: Serial Console
Operating Instructions Serial Console You can connect a serial console to the COM port of the Sophos UTM hardware appliances. You can use, for instance, the Hyperterminal terminal program which is included with most versions of Microsoft Windows to log on to the appliance console. - Page 12 Registered in England and Wales No. 2096520, The Pentagon, Abingdon Science Park, Abingdon, OX14 3YP, UK Sophos is the registered trademark of Sophos Ltd. All other product and company names mentioned are trademarks or registered trademarks of their respective owners.
Need help?
Do you have a question about the SG 210 and is the answer not in the manual?
Questions and answers