Related Manuals for WaterLogic F-FWEG1-M-A-NT Series
Summary of Contents for WaterLogic F-FWEG1-M-A-NT Series
- Page 1 THE HYBRID WATER PURIFIER USER MANUAL Congratulations on the purchase of your water purifier F-FWEG1-M-A-NT-**-*** Warning: Boil the water should the purification unit fail...
- Page 2 DECLARATION Waterlogic International Ltd 1. If any abnormal case occurs, firstly unplug 6. Children must not play with the appliance. 11. This appliance contains a UV-C emitter the appliance. (UV lamp) 7. If the supply cord or the detachable cord 2.
- Page 3 Reservoir capacity: 1.5 Liters • Only use Waterlogic UV lamps and filters installée et mise à la terre conformément à standards. The system is not intended to with the appliance, failure to do so will void the warranty tous les codes et règlements locaux...
-
Page 4: Box Contents
1. BOX CONTENTS 2. SET-UP GUIDE Remove the HYBRID from the box. To IMPORTANT HYBRID UNIT avoid damaging the appliance DO NOT Check the unit for any damage, if the RESERVOIR LID use any sharp object to open the box appliance is damaged then please RESERVOIR Please check the contents of the box and... - Page 5 Re-fit the reservoir to the appliance components fail, and the water in your area is making sure it is firmly fitted particularly hard, we recommend purchasing a Waterlogic de-scaling kit and de-scaling the unit Repeat steps 2.4-2.7 three to four x3-4 times (3x - 4x).
- Page 6 ANY OF THE COMPONENTS FAIL, AND THE WATER IN YOUR AREA Please make sure you use only original IS PARTICULARLY HARD, WE Waterlogic replacement parts. If you RECOMMEND PURCHASING A are not sure which replacement parts WATERLOGIC DE-SCALING KIT to use, please consult with your local...
- Page 7 Insert the new UV lamp while holding the Fit the new filter assembly into the white end caps only. Insert the UV lamp appliance as follows: as shown in the illustration and push it all 1. Insert the filter assembly back into the way down until it cannot go its cradle, aligning the two male spigots any further...
-
Page 8: Button Functions
4. BUTTON FUNCTIONS 3.10 Re-fit the top cover, making sure the When the appliance is in standby mode the button will be blue but when it is front is attached first. If the top cover is not fitted correctly the unit will touched it will turn green and water will not switch on be dispensed... -
Page 9: Troubleshooting
Should the machine fail or any of the components fail, and the water in your area is particularly 3.13 hard, we recommend purchasing a Waterlogic de-scaling kit and de-scaling the unit. In the unlikely event that the UV bulb 8. STORAGE should fail the UV icon will flash and alarm 20 times. - Page 10 They can take this product for environmental safe recycling. Manufactured by Qingdao Waterlogic Manufacturing Co., Ltd No 10 Jinling Road, Jinling Industrial Zone, Chengyang District, Qingdao, 266111, Shandong, P.R. CHINA 25042014v19...