Box Contents; Get To Know Your Canvio ® Home - Toshiba Canvio Home User Manual

Box contents

BOX CONTENTS
Check to make sure you have the following:
GET TO KNOW YOUR CANVIO
Power/in-use
indicator lights
Feature Description
Power/in-use 5 lights (4 white, 1 amber) that indicate device status as follows:
indicator lights
v
v
v
v
v
Reset button
USB port Insert a USB drive, or connect a USB cable (sold separately) to a printer.
Ethernet port Connect the Ethernet cable to your network router.
Security cable slot Connect a Kensington
Power jack Connect the AC adapter to a working outlet.
®
HOME
Reset button
USB port
Ethernet port
Security cable slot
Power jack
All lights flashing: Device is powering up and is not yet online.
Single flashing white (bottom) light: Device is on and has gone into power-saving mode after a
period of inactivity.
Single flashing amber (top) light: An error has occurred. Disconnect and reconnect both the
AC adapter and the Ethernet cable.
NOTE If the amber light continues flashing, contact Toshiba support. See
"Service and support" on page
One or more solid lights: The device is connected and working properly. The number of lights
displayed indicates how much device memory is free, as follows:
v
Single (bottom) light: Over 70% of device memory is free.
v
Two lights: 50–70% of device memory is free.
v
Three lights: 30–50% of device memory is free.
v
Four lights: 10–30% of device memory is free.
v
All lights: Less than 10% of device memory is free.
®
To reset your CANVIO HOME, press and hold the button for 2 seconds, until the
device indicator lights flash.
NOTE A reset sets the device name and password back to the default
settings. It does not erase any data (photos, videos, music, etc.).
®
security cable to lock your device to a desk or other object.
9
Quick Start Guide
47.
Warranty
Copyright © 2013 Toshiba