Using The Easy Scan Utility - Konica Minolta IV Instruction Manual

Using the Easy Scan Utility

When the Easy Scan Utility is launched, the Easy Scan Wizard opens. Simply follow
the instructions on the Wizard to scan images.
The status bar at the top of each window gives instructions or describes function on
which the mouse pointer is located.
To exit the Easy Scan Utility at any point, click the quit button in the bottom left corner
of the window. The film holder will be ejected automatically.
Scanner Notes (Macintosh)
To cancel an index scan, prescan, or final scan once it has started, click and hold
the mouse on the cancel button in the progress dialog box or press and hold the
command and period (.) keys until the cancel button appears to depress.
24 E
ASY SCAN UTILITY
A screen requesting a film holder appears. Load and
insert the holder following the instructions in the
loading a film holder section of the hardware manual.
If an optional APS adapter is used, an index scan will
be made and the next window is skipped. The APS
auto-detect function automatically sets the film type
between color and black and white, and positive and
negative.
When scanning 35mm film, click
the appropriate button to specify
the film type; film for slides is
positive film, and film for prints is
negative film. The border of the
film-type button is highlighted to
indicate the selection. Click the
next button to begin an index scan.
Film-type buttons