Scan Mode Screen - Konica Minolta SL1000 User Manual

SL1000 User's Guide

3 SCAN Mode Screen

The image is displayed on the application screen. This mode enables you to read the image and set
various functions.
Listed below is an explanation of the functions that can be set in SCAN Mode.
3
1. Scan Window
2. Cropping Area
3-16
The scanning image is displayed.
While the film is moving, animation (Follow to movement) is displayed.
Moreover, when the film stops, the still picture (Read by high resolution)
is displayed.

The image arbitrarily displayed by the zoom operation of
NOTE !
the Touch Panel can be magnified and be reduced for
the multi touch environment.

To enable the acknowledgment of the next operation
after the film stops, movie is displayed for a while.
Response time from the film stop to the still image
display can be changed.
Please contact authorized service dealer for the setting
change.

The image quality of movie can be changed.
Please contact authorized service dealer for the setting
change.
The area to the output file and the output printer is selected, and
displayed. The size of the Cropping Area changes if a quadrangle in four
corners and all sides is dragged.

The Cropping Area set within the selection crop size
NOTE !
range is output when the fixed form size (Excluding
Custom) has been selected by "Output setting",

The Cropping Area is not changed at the zoom. Please
return to normal display pressing "Fit", and execute it.
1
2
4
5