Saving Scan Settings As A Job; Deleting A Job - Konica Minolta IV Instruction Manual

Saving scan settings as a Job

Frequently used scan settings can be saved.
With the settings to be saved in the scan setting window,
click the save Job button. The Job-registry dialog box will
open.
Select the category in which to save the settings from
the drop-down menu.
Enter the Job name. Click OK to save the settings.
The Job file name can contain up to 24 characters.
See page 57 to load a Job.

Deleting a Job

A Job file can be deleted. Once deleted, it can not be
recovered.
Click the load Job button.
Select the Job file to be deleted from the Job
categories in the selection window. Use the
keyboard delete key to erase the selected file.
Click the cancel button to close the window.
57