Net Search - UTStarcom F1000 User Manual

Menu
- If 128Bit is selected, you can select Edit or Activate to edit or
activate the 128Bit WEP key. While editing the WEP key, ensure
that the WEP key consists of 13 ASCII characters or 26
hexadecimal characters
To activate the setting of the SSID and WEP key, select Activate
Note: The corresponding AP (Access Point) need to select WEP
Key 1 as the default transmit key. Enter WEP Key 1 at the phone
The WEP key setting may be different due to AP settings
For a Linksys AP, a passphase is used to generate four WEP keys
and WEP Key 1 need to be selected. At the phone, you should enter
WEP Key 1
If an AP supports only a fixed hexadecimal WEP key, you should
enter the same WEP key to the phone
If an AP supports both ASCII and hexadecimal WEP keys, you can
enter either the ACSII WEP key or the hexadecimal WEP key to the
phone

4.5.4 Net Search

WiFi-Settings Net Search
This option enables you to search available networks (10 maximum) for
the phone. After selecting this option, the phone will start to search for
networks. The available SSID list will be displayed
Press to highlight the desired SSID, and press the left soft key
(Ok) to display the detailed information. To save the SSID, press the left
soft key (Save). Press
and press the left soft key (Ok). You can further edit the SSID, and then
press the left soft key
For setting the corresponding WEP key and activating the SET, see
"SSID & WEP KEY"
58
to highlight the desired SET (SET1~4),
(Ok) to complete the operation