Seat Height Adjustment - BMW K 1600 GT Installation Manual

K 1600 GTL owners , please
continue to the next page for
further instructions about
installing your new Sargent
heated seat.

Seat Height Adjustment

K 1600 GT
K 1600 GTL
Note
SARGENT CYCLE PRODUCTS, 1036 HUBBARD STREET, JACKSONVILLE, FL 32206 PH: (904) 354-4531 FAX: (904) 354-7979
Remove the red releasable zip
tie in the area shown.
Gently pull out the zip tie by the
"head" or fastener to allow the
latch rod to rotate freely.
It is now safe to use your key in
the lock.
K 1600 GT owners may now
mount the new Sargent seats.
Optional, rear seat thumbscrews have been provided for added convenience.
Your Sargent seats comes with OEM compatible heat plugs for plug and play
convenience.
See your BMW K 1600 GT owner's manual for instructions on seat height
adjustment.
The Low setting, with the safety retainer
in place, is shown on right. The safety
retainer will need to be removed to
change the seat to the high setting. To
remove the clip, rotate the bottom to the
right and lift up to disengage.
If you elected to purchase the cosmetic
kit listed on the opening page of this
instruction, install it now per the
instructions included with that kit.
Should it ever become necessary to re-install the stock one piece seat , the above
operation must be reversed. The mechanism must be oriented in the low
position and the safety retainer reinstalled.
BMW K 1600 GT / GTL SEAT INSTALLATION GUIDE
Retainer Clip
5