Front Seat Installation - BMW K 1600 GT Installation Manual

Front Seat Installation

K 1600 GT / GTL
Note: K 1600 GTL owners
An additional, optional purchase
of BMW part #77348520028 is
recommended by BMW for those
GTL owners who wish to convert
from the one-piece OEM seat to
the two-piece OEM seats. This kit
is not required for mounting the
seat or safe operation, but rather
it is made to hide a gap between
the bike's body work and the seat.
This kit will also will work with
the Sargent two-piece seat.
SARGENT CYCLE PRODUCTS, 1036 HUBBARD STREET, JACKSONVILLE, FL 32206 PH: (904) 354-4531 FAX: (904) 354-7979
Complete instructions for installing and adjusting the two-piece seat is included
with the optional BMW cosmetic kit #77348520028. You may also refer to page 5
of this document, "Seat Height Adjustment" for information and warnings.
Now that your rear seat is secured, you can connect the heat and install the front
seat.
Connect your rear seat heat plug to the front seat heat plug.
Install the front seat by engaging the two receivers
with the two support bumpers in the bike's seat
height adjustment mechanism. Lower the back of
the front seat onto the rear seat latch, with firm
pressure, engage the lock.
Receivers
Now you're ready to ride!
BMW K 1600 GT / GTL SEAT INSTALLATION GUIDE
Rear Seat Latch
Bumpers
7