Memory Features - Chevrolet 2013 Corvette Owner's Manual

Memory Features

On vehicles with the memory
feature, the controls on the driver
door are used to program and recall
memory settings for the driver seat,
outside mirrors, and the telescopic
steering column.
Storing Memory Positions
To save into memory:
1. Adjust the driver seat, both
outside mirrors, and the
telescopic steering column.
2. Press and hold 1 until
two beeps sound.
3. Repeat for a second driver
position using 2.
To recall:
On vehicles with an automatic
transmission, press and release
1 or 2.
If the vehicle is in P (Park), a
single beep sounds and the
memory position is recalled after
a brief delay.
If the vehicle is not in P (Park),
three beeps sound and the
memory position is not recalled.
On vehicles with a manual
transmission, when the vehicle
is on, the parking brake must be
set to recall a memory position.
Press and release 1 or 2.
A single beep sounds and the
memory position is recalled after
a brief delay.
I n f o r ma t i o n P r o v i d e d b y :
In Brief
If the vehicle is on and the
parking brake is not set,
three beeps sound and the
memory position is not recalled.
See Memory Seats on page 3 4.
Easy Exit Driver Seat
This feature can move the seat
rearward and the telescopic steering
column out of the way to allow extra
room to exit the vehicle.
: Press to save and recall the
easy exit seat position.
To save into memory:
1. Recall the desired driving
position by pressing 1.
2. Adjust the seat and the
telescopic steering column to the
desired exit position.
3. Press and hold until
two beeps sound.
4. Repeat for a second driver
position using 2.
1-9