Chevrolet 2013 Corvette Owner's Manual page 277

Hide thumbs Also See for 2013 Corvette:
Table of Contents

Advertisement

shown on the dipstick are harmful
to the engine. If you find that you
have an oil level above the
operating range, i.e., the engine
has so much oil that the oil level
gets above the cross-hatched
area that shows the proper
operating range, the engine could
be damaged. You should drain
out the excess oil or limit driving
of the vehicle and seek a service
professional to remove the
excess amount of oil.
See Engine Compartment Overview
on page 10 8 for the location of the
external engine oil tank and fill cap.
Add enough oil to put the level
somewhere in the proper operating
range. Push the dipstick all the way
back into the oil tank when through.
Changing Engine Oil and Filter
(Z06, ZR1, manual
transmission Grand Sport
Coupe, and 427 Convertible)
These vehicles have a
racetrack-ready dry sump engine
lubrication system. This
high-performance system operates
differently than a standard engine
lubrication system and requires a
special procedure when changing
the engine oil and filter. Follow this
procedure closely when changing
the engine oil and filter.
I n f o r ma t i o n P r o v i d e d b y :
Vehicle Care
Z06 Shown, ZR1, manual
transmission Grand Sport Coupe,
and 427 Convertible Similar
A. Engine Oil Drain Plugs
B. Seals
1. Remove the two engine oil drain
plugs from the bottom of the
engine oil pan. One drain plug
drains the external oil tank via
the oil transfer supply line. The
other drain plug drains residual
oil from the crankcase sump.
Allow the oil to drain.
10-17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents