Memory Features; Heated And Ventilated Seats - Chevrolet Equinox 2018 Owner's Manual

Memory Features

If equipped, memory seats allow two
drivers to store and recall their
unique seat positions for driving the
vehicle, and a shared exit position
for getting out of the vehicle. Other
feature positions may also be set,
such as power mirrors and power
steering wheel, if equipped. Memory
positions are linked to RKE
transmitter 1 or 2 for automatic
memory recalls.
Before storing, adjust all available
memory feature positions. Turn the
ignition on and then press and
release SET; a beep will sound.
Then immediately press and hold 1,
2, or (Exit) on the driver door
until two beeps sound. To manually
recall these positions, press and
hold 1, 2, or until the saved
position is reached. See Memory
Seats 0 63.
Heated and Ventilated
Seats
If available, the buttons are on the
climate control panel. To operate,
the engine must be running.
In Brief
To heat the driver or passenger seat
cushion and seatback, press
. Indicator lights on the button
show the current setting.
To ventilate the driver or passenger
seat cushion and seatback, press
C
or . Indicator lights on the button
show the current setting.
Press the heated or ventilated
button once for the highest setting.
With each press of the button, the
heated or ventilated seat will
change to the next lower setting,
and then to the off setting. The
lights indicate three for the highest
setting and one for the lowest.
See Heated and Ventilated Front
Seats 0 66.
13
or