Chevrolet 2013 Corvette Owner's Manual page 205

Hide thumbs Also See for 2013 Corvette:
Table of Contents

Advertisement

x 9 w
(Fan): Press to increase
or decrease the fan speed. The fan
speed setting will appear in the
display.
Pressing the arrows will delete
AUTO from the digital display. The
fan graphics with the fan speed bars
will be shown. The AUTO button
must be pressed to return to the
automatic fan control.
If the airflow seems low when the
fan speed is at the highest setting,
the passenger compartment air filter
may need to be replaced. For more
information, see Passenger
Compartment Air Filter on page 8 6.
(Air Delivery Mode Control):
Press this button to manually lock in
the current air delivery setting and
to stop the automatic mode control.
Pressing
deletes AUTO from the
digital display and the mode
graphics will be shown. To change
the setting, press
again. The
AUTO button must be pressed to
return to the automatic mode
selection.
To change the current mode, select
one of the following:
H
(Vent): Air is directed to the
instrument panel outlets, with some
air directed to the floor outlets.
%
(Bi-Level): Air is divided
between the instrument panel and
floor outlets.
6
(Floor): Air is directed to the
floor outlets, with some air directed
to the windshield and side window
defogger outlets.
-
(Floor/Defog): This mode clears
the windows of fog or moisture. Air
is directed to the windshield and the
floor outlets, with a small amount to
the side window outlets. In this
mode, the system automatically
turns off the recirculation and runs
the air conditioning compressor
unless the outside temperature is at
I n f o r ma t i o n P r o v i d e d b y :
Climate Controls
or below freezing. The recirculation
mode cannot be selected while in
the defog mode.
1
(Defrost): This mode clears the
windows of fog or frost more quickly.
Air is directed to the windshield, with
a small amount directed to the side
window outlets. The indicator light
comes on and the digital display will
show the defrost mode symbol and
fan speed when the front defrost
mode is being used. In this mode,
the system automatically turns off
the recirculation and runs the air
conditioning compressor, unless the
outside temperature is at or below
freezing. Recirculation cannot be
selected while in the defrost mode.
1
Pressing
again will return the
system to the last operating mode.
For severe ice conditions, turn the
driver's temperature knob to 32°C
(90°F) while in defrost mode.
Do not drive the vehicle until all the
windows are clear.
8-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents