Chevrolet 2013 Corvette Owner's Manual page 65

On vehicles with a manual
transmission, when the vehicle
is on, the parking brake must be
set to recall a memory position.
Press and release 1 or 2.
A single beep sounds and the
memory position is recalled after
a brief delay.
If the vehicle is on and the
parking brake is not set,
three beeps sound and the
memory position is not recalled.
Memory Remote Recall (Automatic
Transmission)
This feature can recall the driver
seat, outside mirrors, and telescopic
steering column, if equipped, to
stored positions when entering the
vehicle.
To activate, enter the vehicle and
start the engine. The driver seat,
outside mirrors, and telescopic
steering column will move to the
memory position associated with the
transmitter used to unlock the
vehicle.
This feature is turned on or off using
the vehicle personalization menu.
See Vehicle Personalization on
page 5 52.
To stop recall movement, press one
of the power seat controls, power
mirror or memory buttons, or the
telescopic steering column switch.
If something has blocked the driver
seat while recalling a memory
position, the recall may stop.
Remove the obstruction; then press
and hold the appropriate manual
control for the memory item that is
not recalling for two seconds. Try
recalling the memory position again
by pressing the appropriate memory
button. If the memory position is still
not recalling, see your dealer for
service.
Easy Exit Driver Seat
This feature can move the seat
rearward and the telescopic steering
column, if equipped, out of the way
to allow extra room to exit the
vehicle.
I n f o r ma t i o n P r o v i d e d b y :
Seats and Restraints
(Easy Exit Driver Seat): Press
to save and recall the easy exit seat
position.
To save into memory:
1. Recall the desired driving
position by pressing 1.
2. Adjust the seat and the
telescopic steering column to the
desired exit position.
3. Press and hold until
two beeps sound.
4. Repeat for a second driver
position using 2.
To recall, press and release
The vehicle must be in P (Park) for
an automatic transmission or the
parking brake must be set for a
manual transmission. A single beep
sounds. The seat and telescopic
steering column will move to the
position previously stored for the
identified driver.
3-5
.