Yamaha WR450FR Owner's Service Manual page 256

FRONT FORK
5. Install:
Spring guide 1
G
Locknut 2
G
To damper rod 3.
NOTE:
Install the spring guide with its cut a facing
G
upward.
With its thread b facing upward, fully finger
G
tighten the locknut onto the damper rod.
6. Install:
Dust seal 1
G
Stopper ring 2
G
Oil seal 3
G
Plain washer 4
G
Slide metal 5
G
To inner tube 6.
NOTE:
Apply the fork oil on the inner tube.
G
When installing the oil seal, use vinyl seat a
G
with fork oil applied to protect the oil seal lip.
Install the oil seal with its manufacture's
G
marks or number facing the axle holder side.
7. Install:
Piston metal 1
G
NOTE:
Install the piston metal onto the slot on inner
tube.
8. Install:
Outer tube 1
G
To inner tube 2.
5 - 33
CHAS
New
New
New