Yamaha WR450FR Owner's Service Manual page 203

AC MAGNETO AND STARTER CLUTCH
10. Install:
Engine guard 1
G
Clamp 2
G
Bolt [engine guard (front)] 3
G
Bolt [engine guard (rear)] 4
G
Cylinder head breather hose 5
G
11. Connect:
AC magneto lead
G
Refer to "CABLE ROUTING DIA-
GRAM" section in the CHAPTER 2.
12. Install:
Shift pedal 1
G
Bolt (shift pedal)
G
NOTE:
When installing the shift pedal onto the shift
shaft, be sure that the center of the shift pedal
is about 1 mm (0.04 in) a above the top of the
footrest.
4 - 82
ENG
34 Nm (3.4 m · kg, 24 ft · lb)
23 Nm (2.3 m · kg, 17 ft · lb)
12 Nm (1.2 m · kg, 8.7 ft · lb)