Section 2: Mechanical Section; Tang Strip Installation - Audio Note Interstage Mono Block 300D Instruction Manual

Section 2: Mechanical Section

The first part of this manual will be the mechanical installation that is required – once that is completed we will proceed
with the wiring part!
First of all we use Metric Hardware in the kit – M3 and M4 metric – an M4 screw is similar to a #8 in the imperial system
and an M3 is between a #4 & #6 – so the M4 is the bigger of the two – we will also be using flat and pan head screws –
the flat or countersunk screws are very hand when we need a flat surface for a transformer to sit on the screw for
example! Ok lets get started!

Tang Strip Installation

Let's start by installing the two "Tang Strips" – these are used to support the front insert plate that we will be installing later
on.
Copyright © 2010 AudioNote Kits Page 5
www.AudioNoteKits.com
audionotekits@rogers.com