Iec Wiring - Audio Note Interstage Mono Block 300D Instruction Manual

IEC Wiring

In this section we will be hooking up the IEC section – the following example is for 120V operation – refer to the
appendix for wiring for all the world voltages.
Copyright © 2010 AudioNote Kits
www.AudioNoteKits.com
audionotekits@rogers.com
Now you can install the green wire
with GND lug and crimp on to the GND
post of the IEC socket which is the one
on the bottom of the IEC.
The third wire will be used later for the
power supply ground.
Gently tighten the nut – we may be
moving the wires a little so no need to
tighten too much!
Page 14