Message Alert - Panasonic KX-TG4311C Operating Instructions Manual

TG431xC_OI.book Page 31 Tuesday, January 29, 2008 2:56 PM
Listening to voice mail
messages
The unit lets you know that you have
new voice mail messages in the
following ways:
– "New Voice Mail" is displayed on
the handset.
– The message indicator on the handset
flashes slowly if message alert feature
is turned on (page 31).
1
Press {C}, then press {VM} within
15 seconds.
OR
{MENU} i {#}{3}{3}{0}
L The speakerphone turns on.
2
Follow the pre-recorded
instructions.
3
When finished, press {OFF}.
Note:
L If {VM} is not displayed, the voice mail
access number has not been stored.
Store the number (page 30).
L If the handset still indicates there are
new messages even after you have
listened to all new messages, turn it
off by pressing and holding {OFF}
until the handset beeps.
L If your voice mail service uses voice
mail tones and a message is over 3
minutes long, the handset may not
indicate new messages.
L If your voice mail service uses voice
mail tones, the tones are heard from
any phone connected to the same
line. If you want to use another phone
to listen to voice mail messages, you
have to dial your access number
manually.
Voice Mail Service

Message alert

You can select whether or not the
message indicator on the handset
flashes slowly when new messages are
recorded. The default setting is "On".
1
{MENU} i {#}{3}{4}{0}
2
{V}/{^}: Select the desired setting.
i {Save} i {OFF}
Note:
L While message alert is on, battery
operating time is shortened (page 12).
31