Text Message (Sms) Alert; Alert Settings For Your Dect Phone - Panasonic KX-TGD58 M2 Series Operating Instructions Manual

– Handset: "Alert On/Off" must be
turned on (page 47).
R If this feature does not work, turn on your
device's Bluetooth feature, unplug the base
unit's AC adaptor, and then reconnect it.
*1 Turning on [Application Alerts
manager]
Use the following procedure after
installing the Link to Cell app.
Android 2.x: Open your device's
[Settings] app. a Tap [Accessibility].
a Turn on the [Accessibility] and
[Application Alerts manager]
checkboxes.
Android 4.x: Open your device's
[Settings] app. a Tap [Accessibility].
a Turn on [Application Alerts
manager].
Requirements
R An Android device (Android 2.1 or later)

Text message (SMS) alert

®
For iPhone and BlackBerry
This feature alerts you on your DECT phone
when your paired cellular phone receives SMS
messages. The Link to Cell app is not required
for iPhone and BlackBerry users.
Important:
R Your cellular phone must support Message
Access Profile (MAP) specification.
R For further information, refer to the
instructions on web page listed below:
www.panasonic.net/pcc/support/tel/sms/
R To use this feature, the following settings
are required:
– iPhone and BlackBerry Phone:
Bluetooth must be turned on.
– Handset: "Alert On/Off" must be
turned on (page 47).
R If this feature does not work, turn on your
device's Bluetooth feature, unplug the base
unit's AC adaptor, and then reconnect it.
For assistance, please visit http://shop.panasonic.com/support
Alert settings for your
DECT phone
If your cellular phone is paired to the base unit
and receives notifications, the handset can
alert you:
– by briefly displaying a message
– by announcement
– by sounding alert tones
Important:
R For Android users: Use the Link to Cell app
to enable the desired alerts (page 46).
Turning alert on/off
Once this feature is turned on, it will alert you
on the handset when your cellular phone
receives notifications.
– "On" (default): The handset alerts you.
– "Off": The handset does not alert you.
1
2
®
users
Setting the voice alert
You can turn on/off the voice alert.
– "On" (default): The handset notifies you by
voice announcement.
– "Off": Voice announcement is not
available as alert.
1
2
Selecting the alert tone
1
2
Using Bluetooth® Devices
For CELL 1: MMENUN#6101
For CELL 2: MMENUN#6102
MbN: Select the desired setting. a
MSAVEN a MOFFN
For CELL 1: MMENUN#6031
For CELL 2: MMENUN#6032
MbN: Select the desired setting. a
MSAVEN a MOFFN
For CELL 1: MMENUN#6041
For CELL 2: MMENUN#6042
MbN: Select the desired setting. a
MSAVEN a MOFFN
47