Table of Contents
Advertisement
TG431xC_OI.book Page 32 Tuesday, January 29, 2008 2:56 PM
Intercom/Locator
Intercom
Intercom calls can be made between
handsets.
Note:
L If you receive an outside call while
talking on the intercom, you hear 2
tones.
To answer the call with the handset,
press {OFF}, then press {C}.
L When paging unit(s) for an intercom
call, the paged unit(s) beeps for 1
minute.
Making an intercom call
1
{INTERCOM}
2
{V}/{^}: Select the desired unit. i
{Select}
L To stop paging, press {OFF}.
3
When you finish talking, press
{OFF}.
Answering an intercom call
1
Press {C} to answer the page.
2
When you finish talking, press
{OFF}.
Note:
L When the ringer volume for outside
calls is set to off (page 22), the
handset rings at a low level for
intercom calls.
Transferring calls,
conference calls
Outside calls can be transferred
between 2 handsets. 2 handsets can
have a conference call with an outside
party.
32
1
During an outside call, press
{INTERCOM} to put the call on hold.
2
{V}/{^}: Select the desired unit. i
{Transfer}
3
Wait for the paged party to answer.
L If the paged party does not
answer, press {C} to return to
the outside call.
4
To complete the transfer:
Press {OFF}.
L The outside call is being routed to
the destination unit.
To establish a conference call:
Press {Conf}.
L To leave the conference, press
{OFF}. The other parties can
continue the conversation.
L To put the outside call on hold,
press {HOLD}. To resume the
conference, press {Conf}.
Answering a transferred call
Press {C} to answer the page.
Note:
L After the paging party disconnects,
you can talk to the outside caller.
Handset locator
You can locate a misplaced handset by
paging it.
1
Base unit:
{LOCATOR}
L All registered handsets beep for 1
minute.
2
To stop paging:
Base unit:
Press {LOCATOR}.
Handset:
Press {OFF}.
Advertisement
Table of Contents
