Table of Contents
Advertisement
Using Bluetooth® Devices
– Android phone: [Application Alerts
manager]
*1
must be turned on.
– Handset: "Alert On/Off" must be
turned on (page 68).
R If this feature does not work, turn on your
device's Bluetooth feature, unplug the base
unit's AC adaptor, and remove the batteries
from the base unit. Then, reconnect AC
adaptor and insert the batteries into the
base unit.
*1
Turning on [Application Alerts
manager]
Use the following procedure after
installing the Link to Cell app.
Android 2.x: Open your device's
[Settings] app. a Tap [Accessibility].
a Turn on the [Accessibility] and
[Application Alerts manager]
checkboxes.
Android 4.x: Open your device's
[Settings] app. a Tap [Accessibility].
a Turn on [Application Alerts
manager].
Requirements
R An Android device (Android 2.1 or later)
Text message (SMS)
alert
®
For iPhone
and BlackBerry
This feature alerts you on your DECT phone
when your paired cellular phone receives SMS
messages. The Link to Cell app is not required
for iPhone and BlackBerry users.
Important:
R Your cellular phone must support MAP
(Message Access Profile) specification.
R For further information, refer to the
instructions on web page listed below:
www.panasonic.net/pcc/support/tel/sms/
R To use this feature, the following settings
are required:
– iPhone and BlackBerry Phone:
Bluetooth must be turned on.
For assistance, please visit http://shop.panasonic.com/support
68
TGM43x(en)_0426_ver031.pdf
R If this feature does not work, turn on your
Alert settings for your
DECT phone
If your cellular phone is paired to the base unit
and receives notifications, the handset can
alert you:
– by briefly displaying a message
– by announcement
– by sounding alert tones
Additionally, the message indicator flashes
rapidly if the handset or base unit message
indicator's "Application alert" setting is
enabled (page 31).
Important:
R For Android users: Use the Link to Cell app
Turning alert on/off
Once this feature is turned on, it will alert you
on the handset when your cellular phone
receives notifications.
– "On" (default): The handset alerts you.
®
users
– "Off": The handset does not alert you.
1
2
Setting the voice alert
You can turn on/off the voice alert.
– "On" (default): The handset notifies you by
– "Off": Voice announcement is not
1
68
– Handset: "Alert On/Off" must be
turned on (page 68).
device's Bluetooth feature, unplug the base
unit's AC adaptor, and remove the batteries
from the base unit. Then, reconnect AC
adaptor and insert the batteries into the
base unit.
to enable the desired alerts (page 67).
For CELL 1: MMENUN#6101
For CELL 2: MMENUN#6102
MbN: Select the desired setting. a
MSAVEN a MOFFN
voice announcement.
available as alert.
For CELL 1: MMENUN#6031
For CELL 2: MMENUN#6032
2016/04/26
10:55:19
Advertisement
Table of Contents
