+
–
1
1
3
L/R
2
4 1
GEAR POSITION SWITCH
GEAR POSITION SWITCH RELAY
P
B
B/R
49
SIGNAL SYSTEM
1. Check:
• Gear position switch 1 continuity
Faulty → Replace.
Shift lever position
DRIVE (D) or LOW (L)
REVERSE
1. Inspect:
• Gear position switch relay 1
Inspection steps:
• Disconnect the gear position switch relay from
the coupler.
• Connect the pocket tester (Ω × 1) and battery
(12 V) to the gear position switch relay terminals
as shown.
Positive battery terminal → Blue/Red 1
Negative battery terminal → Black/Red 2
Positive tester probe → Pink 3
Negative tester probe → Black 4
• If gear position switch relay does not have conti-
nuity between the pink and black terminals,
replace it.
–
+
ELEC
Continuity
Yes
No