Yamaha VK10W Supplementary Service Manual page 91

1 Headlight sub-wire harness
2 Oil tank outlet hose
3 Starter motor positive lead
4 Pass the starter motor positive
lead behind the engine.
5 Gear position switch lead
6 To the tail/brake light
7 Route the wire harness to the
front of the frame cross member
bolts, making sure that the har-
ness is not on the bolts.
8 Fasten the wire harness with the
holder. Secure the frame cross
member and the holder to the
frame with the nut and bolt.
9 Gear position switch lead
0 Fuse box
A Wire harness
B Conduction assembly
C Brake hose
D Parking brake cable
E Coolant reservoir
F Route the parking brake cable so
that it is not caught on the check
valve hose clamp.
G Fasten the positive battery lead
terminal and negative battery
lead terminal with the holder.
CABLE ROUTING
85
SPEC