Download Print this page

Front Panel Description; Installing The Software - Teledyne SierraNet M408 Quick Manual

Sierranet m408 analyzer is teledyne lecroy's 10 gigabit ethernet
Hide thumbs Also See for SierraNet M408:

Advertisement

4

Front Panel Description

2
3
Features
The Analyzer has the following features on the front:
[1] LED Indicators for P1-P4, P5-P8 and P9-P10 for Speed,
Link and Status
Speed LEDs
The LEDs for SPEED illuminate as follows:
GBE
Yellow
Reserved
Green
10 GigE
Blue
40 GigE
Link Activity LEDs
Green
Network activity Detected
Yellow
Link up, no activity
No Color
No link
Status LEDs
Yellow Blinking
Waiting for trigger
Yellow Solid
Triggered
Red
Error detected
No Color
No Activity
5
Front Panel Buttons
The following parameters can be viewed and/or configured directly on the front panel, using the display and 5 button keypad:
-
Display of IP address
-
Display of model name: "SierraNet M408"
-
Connection status
-
Display of unit name
6
Rear Panel Description Expansion Slot
The analyzer expansion slot at the back of the SierraNet M408
system can accommodate the SYNC Expansion Card that can be
used to daisy-chain multiple analysis systems.
Note: Do not open the enclosure except for adding expansion
cards. No user serviceable parts are inside.
7

Installing the Software

1. Insert the Installation CD-ROM into the CD drive on the host machine. The installation automatically starts setup,
unless Auto Run is off. In that case, select the CD-ROM from "My Computer" and click Setup. Follow the instructions to
complete the installation.
2. Restart the computer before using the software.
Note: If you get an error message during installation of the drivers, consult your system administrator.
1
1
4
5
Please see the SierraNet M408 User Manual for details on
[2] Power Switch
[3] Status and Configuration LCD Display
Fibre Channel
[4] Front Panel 5-Buttons keypad
4G/2G/1G FC
[5] SFP+ 10 GigE / FC connectors for ports 1-4
8G FC
[6] QSFP+ 40 GigE connectors for ports 9-10
16G FC
[7] SFP+ 10 GigE / FC connectors for ports 5-8
[8] External Trigger Input (Trigger In)
[9] External Trigger Output (Trigger Out)
[10] USB Port for host connectivity
[11] Ethernet Port for network connectivity
-
1
1
1
6
7
the LEDs.
IP configuration
IP mode dynamic, or
IP mode static
8
9
10
11

Advertisement

loading