General Specifications - Yamaha QL5 Owner's Manual

Yamaha digital mixing console owner's manual
Hide thumbs Also See for QL5:
Table of Contents

Advertisement

General specifications

Sampling Frequency
Signal Delays
Fader
Frequency Response
*3
Total Harmonic Distortion
*4
Hum & Noise
Dynamic Range
Crosstalk @ 1kHz
Dimensions (W x H x D)
and Net Weight
Power Requirements (in watts) QL5: 200W, QL1: 135W
Power Requirements (in volts,
Hz)
Temperature Range
Included Accessories
Optional Accessories
*1. A 22kHz, 30dB/Oct filter is used to measure crosstalk.
*2. For more information about Mini-YGDAI card support, refer to the Yamaha pro audio website.
http://www.yamahaproaudio.com/
*3. An 80kHz, 18dB/Oct filter is used to measure total harmonic distortion.
*4. An A-Weight filter is used to measure hum & noise.
European Models
Inrush Current based on EN 55103-1:2009
5A (on initial switch-on)
3A (after a supply interruption of 5s)
Conforms to Environments: E1, E2, E3 and E4
Specifications and descriptions in this owner's manual are for information purposes only. Yamaha Corp. reserves
the right to change or modify products or specifications at any time without prior notice. Since specifications,
equipment or options may not be the same in every locale, please check with your Yamaha dealer.
44.1kHz
Internal Clock
48kHz
44.1kHz
+4.1667%, +0.1%, –0.1%, –4.0%
External Clock
48kHz
+4.1667%, +0.1%, –0.1%, –4.0%
Less than 2.5ms, INPUT to OMNI OUT, Fs= 48kHz
100mm motorized, Resolution=1024steps, +10dB to –138dB, –∞dB all faders
+0.5, –1.5dB 20Hz–20kHz, refer to +4dBu output @1kHz, INPUT to OMNI OUT
Less than 0.05% 20Hz–20kHz@+4dBu into 600Ω, INPUT to OMNI OUT, Input Gain= Min.
–128dBu typ., Equivalent Input Noise, Input Gain= Max.,
–88dBu, Residual output noise, ST master off
112dB typ., DA Converter,
108dB typ., INPUT to OMNI OUT, Input Gain= Min.
*1
–100dB
, adjacent INPUT/OMNI OUT channels, Input Gain= Min.
QL5: 828.4mm x 272mm x 563mm, 21.8kg
QL1: 468mm x 272mm x 562mm, 14.7kg
100–240V 50/60Hz
Operating temperature range: 0–40°C
Storage temperature range: –20–60°C
Owner's Manual, dust cover (QL5 only), power cord
Rackmount kit RK1, Mini-YGDAI cards
*2
, Gooseneck Lamp LA1L
General specifications
±200ppm
±200ppm
Owner's Manual
51

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ql1

Table of Contents