General Specifications - Yamaha EMX5 Owner's Manual

Appendix

General Specifications

Maximum Output Power (1 kHz)
Input Channels
Output Channels
Bus
COMP
Input Channel Function
Equalizer
Level Meter
Phantom Power Voltage
Built-in Effect SPX Algorithm
FOOT SW
DSP Processing
Protection
Power Requirements
Power Consumption
Dimensions (W × H × D)
Net Weight
Optional Accessory
Operating Temperature
For other specifications, see the included "Technical Specifications."
The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then download the manual file.
20
EMX5 Owner's Manual
THD+N <10% 630 W + 630 W (4 Ω), 460 W + 460 W (8 Ω)
THD+N <1% 500 W + 500 W (4 Ω), 370 W + 370 W (8 Ω)
12 channels (max. 8 MIC/12 LINE, 4 Mono + 4 Stereo)
CH4: Hi-Z input supported
SPEAKERS (A, B): 1, AUX1 SEND: 1, AUX2 SEND: 1, STEREO OUT (L, R): 1, REC OUT (L, R): 1
Stereo: 1
AUX: 2 (Including FX)
Multiple parameters (gain, threshold, ratio) can be adjusted simultaneously with a single control.
Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to +7 dB
Attack time: approx. 25 ms, Release time: approx. 300 ms
HIGH: 10 kHz ±15 dB (Shelving)
MID: 2.5 kHz ±15 dB (Peaking)
LOW: 100 Hz ±15 dB (Shelving)
2 × 7 points LED meter (-20, -10, -6, 0, +6, +10, PEAK)
+48 V
24 programs
Effect mute on/off
Feedback suppressor, Master EQ
Load Protection: DC-fault
Amplifier Protection: Over heat protection, Over current protection, Integral power protection
Power Supply Protection: Over heat protection, Over current protection
AC 100–240 V, 50 Hz/60 Hz
42 W (Idle) / 210 W (1/8 Power)
465 mm × 308 mm × 325 mm (18.3" × 12.1" × 12.8")
9.5 kg (20.9 lb)
Rack-mount brackets: RK-EMX7, Foot switch: FC5
0 to +40˚C