Attaching The Rk1 Rackmount Kit (Sold Separately) - Yamaha QL5 Owner's Manual

Attaching the RK1 rackmount kit (sold separately)

Attaching the RK1 rackmount kit
(sold separately)
You can attach the optional RK-1 rackmount kit to the QL5 and QL1 and mount it in a rack or an installed system.
1.
Make sure that the power is turned off.
2.
Remove screws
NOTE
Keep the side pad screws together with the pads you removed.
3.
Use the screws included with RK1 to install the hardware.
Tighten the screws at the locations indicated by the arrows.
4.
Attach the hardware to the other side in the same way.
NOTICE
When attaching the RK1 rackmount kit, you must turn off the power switch on the unit and use the screws that are included with the
RK1. Otherwise, malfunctions or electric shock may occur.
50
" A " and detach the side pads.
A
Owner's Manual
A
A
Side Pads