Showers - Bavaria 50 Cruiser 2009 Manual

14. Showers

Your yacht has a hot & cold, fresh-water shower in each head and on the
transom. If the engine has been running, the hot water can be very hot – be
cautious! In order to use the showers, the fresh-water pump must be
activated on the 12V panel. The fresh water pump needs to be on for the
shower pump to operate.
Shower drain
To operate the shower-drain pump, switch on the shower drain switch on the
12v panel.
Press the black button on the shower wall to drain the water.
Transom Shower
The valve to the right of the shower head has two functions:
By turning the knob clockwise and counter clockwise you can change the
temperature of the water. Be careful. The water can be very hot. Test before
showering.
By pushing the valve perpendicular to its long axis you can change the water
pressure. In this picture you would move it to the left and right.
To use the shower head simply pull it out and press the lever on the back. If
no water comes out, make sure that the 12V water switch is on, that the
shower hose is not kinked (access from aft cabin, same side as shower) and
that the water pressure valve is in the correct position.
Shower head Water flow and
temperature control
switch