Table of Contents
Advertisement
Editing
Capturing a Required Part in the Video
(TRIMMING)
Select the required part of a video and save it as a new video file.
The original video remains in its existing location.
0
1
Check that the unit is in the video mode.
.
Check if video mode A is activated.
0
If still image mode (B) is activated, switch to video mode (A).
0
"Selecting Video/Still Image Recording Mode" (A p. 19)
2
Tap <<MEDIA to select the playback mode.
MEDIA
.
3
Tap "MENU".
≪CAM
.
4
Tap "EDIT".
TOP MENU
SILENT
.
5
Tap "TRIMMING".
EDIT
TRIMMING
.
62
REC
MENU
OFF
6
Tap the video to edit.
TRIMMING
.
7
Tap e to pause playback at the desired start point, then tap "A".
TRIMMING
0:01:23
.
When "A" is tapped, the start point is set.
0
After setting the start point, tap d to continue playback.
0
8
Tap e to pause playback at the desired end point, then tap "B".
TRIMMING
0:01:23
A 0:00:23
.
When "B" is tapped, the end point is set.
0
To reset the start or end point, tap "A" or "B" at the desired scene
0
(position).
9
Tap "SET".
TRIMMING
0:01:23
A 0:00:23
SET
.
When "SET" is tapped, the trimming area is confirmed.
0
10
Tap "YES".
DO YOU WANT TO CAPTURE A
SPECIFIC AREA?
YES
.
After copying, tap "OK".
0
When copying finishes, the copied file is added to the index screen.
0
Memo :
The division point may deviate slightly from the selected scene.
0
QUIT
0:12:34
QUIT
0:12:34
QUIT
0:12:34
B 0:12:34
QUIT
NO
Advertisement
Table of Contents
