Table of Contents
Advertisement
Recording
Taking Still Images in Auto Mode
You can record without worrying about the setting details by using the
Intelligent Auto mode.
1
Open the lens cover.
Lens Cover Switch
.
2
Set the "STANDBY/ON OFF" switch to "ON".
.
3
Check that the unit is in the still image mode.
.
Check if still image mode B is activated.
0
If video mode (A) is activated, switch to still image mode (B).
0
"Selecting Video/Still Image Recording Mode" (A p. 19)
4
Check if the recording mode is P Intelligent Auto.
.
If Manual (H) is activated, switch to Intelligent Auto (P).
0
"Selecting Intelligent Auto/Manual Recording Mode" (A p. 18)
24
5
Set the focus on the subject.
.
When focused, the focus icon lights up in green.
0
6
Take a still image.
.
PHOTO lights up when a still image is being captured.
0
Some displays disappear after approximately 3 seconds.
0
Use the n button to change the displays.
To use the viewfinder during recording, close the LCD monitor.
0
"Viewing the Viewfinder/LCD Monitor" (A p. 14)
After recording, close the lens cover.
0
Memo :
Depending on the subject and shooting conditions, recording may not be
0
performed properly even in the Intelligent Auto mode.
Press halfway
Press fully
Advertisement
Table of Contents
