Table of Contents
Advertisement
6
After making sure that everyone is facing the camera, press the
SNAPSHOT button.
.
.
Frames appear around the faces of the subjects.
0
Pressing the SNAPSHOT button again starts the 10-second self-
0
timer.
7
The photographer enters the frame.
Photographer
.
The shutter is released three seconds after the photographer enters
0
the frame.
To stop the self-timer, press the SNAPSHOT button again.
0
Memo :
The "FACE DETECTION" function may fail to detect faces depending on
0
the shooting environment.
Checking the Remaining Recording Time
You can check the remaining recording time on the SD card as well as the
remaining battery power.
1
Tap "MENU".
MEDIA
.
The top menu appears.
0
2
Tap "INFO.".
TOP MENU
SILENT
.
If in the still image mode, go directly to step 4.
0
3
Display the remaining recording time.
MAX RECORDING TIME
0h46m
0h46m
.
The remaining recording time is displayed only in the video recording
0
mode.
To display the remaining battery power, tap l.
0
l will not be displayed when the AC adapter is connected.
0
To exit the display, tap L.
0
4
Display the remaining battery power.
REMAINING BATTERY
MIN
.
"MAX TIME" is an approximate value.
0
When two battery packs are attached, "MAX TIME" displays the total
0
time of both battery packs.
For video recording, tap J to return to the remaining recording time
0
display.
Tap L to exit the display.
0
Remaining battery power will not be displayed when the AC adapter
0
is connected.
Memo :
You can change to the desired video quality by tapping on it from the
0
remaining recording time display.
Recording
REC
MENU
OFF
INFO.
FREE
USED
MAX TIME
MIN
MIN
43
Advertisement
Table of Contents
