Table of Contents
Advertisement
Recording
Using the Silent Mode
When the Silent mode is used, the LCD monitor darkens and operation
sounds will not be output. Use this mode to record quietly in dark places such
as during a performance.
T appears when "SILENT MODE" is set to "ON".
0
Operating procedure
o
A Tap "MENU".
The top menu appears.
0
B Tap "SILENT".
TOP MENU
SILENT
.
C Tap "ON".
SILENT MODE
OFF
.
Useful Settings for Recording
When "AUTO POWER OFF" is set to "ON", this unit turns itself off
0
automatically to conserve power when it is not operated for 5 minutes.
(only when using the battery pack)
" AUTO POWER OFF " (A p. 115)
When "TOUCH PRIORITY AE/AF" is set to "FACE TRACKING", this unit
0
detects faces and automatically adjusts its brightness and focus to record
the faces more clearly.
"Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)" (A p. 34)
Caution :
Do not expose the lens to direct sunlight.
0
Do not use this unit in the rain, snow, or places with high humidity like the
0
bathroom.
Do not use this unit in places subject to excessive humidity or dust, as well
0
as places exposed to steam or smoke directly.
The power may turn off to protect the circuit if the temperature of this unit
0
rises too much.
Do not remove the battery pack, AC adapter, or SD card when the access
0
lamp is lighted. The recorded data may become unreadable.
Do not turn off the camera when the access lamp is lighted. The recorded
0
data may become unreadable.
This unit is a microcomputer-controlled device. Electrostatic discharge,
0
external noise and interference (from a TV, a radio, etc.) might prevent it
from functioning properly. In such a case, turn off the power, then remove
the AC adapter and battery pack. This unit will be reset.
Memo :
Before recording an important scene, it is recommended to conduct a trial
0
recording.
Depending on the shooting conditions, the four corners of the screen may
0
appear dark, but this is not a malfunction. In this case, change the shooting
conditions by moving the zoom lever, etc.
26
OFF
INFO.
ON
Zooming
The angle of view can be adjusted using zoom.
Use the W end (wide angle end) to shoot a wider field of view.
0
Use the T end (telephoto end) to magnify the subject for shooting.
0
.
Memo :
When digital zoom is used, the image becomes grainy as it is digitally
0
enlarged.
The zoom ratio range can be changed.
0
" ZOOM " (A p. 107)
Wide Angle
Telephoto
Advertisement
Table of Contents
