Table of Contents
Advertisement
Denotes risk of electric shock.
Electrical safety
This tool is double insulated in
accordance with EN 60335; therefore
no earth wire is required.
Always check that the power supply
corresponds to the voltage on the rating.
To avoid the risk of electric shock, do
not immerse the cord, plug or motor
unit in water or other liquid.
Mains plug replacement
If a new mains plug needs to be fitted:
•
Safely dispose of the old plug.
•
Connect the brown lead to the live terminal of
the new plug.
•
Connect the blue lead to the neutral terminal.
•
If the product is class l (earthed), connect the
green / yellow lead to the earth terminal.
Warning! If your product is class ll double
insulated (only 2 wires in the cord set), no
connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs
Any replacement fuse must be of the same
rating as the original fuse supplied with the
product.
The following symbols are used
on unit:
On / Off
Reverse
Assembly (Fig. B, C & D)
Warning! Make sure that the appliance is
switched off and unplugged.
•
Loosen the locking screw (10) but do not
remove it from the connector (2).
•
Pull the grinder (8) from the connector.
Unscrew the locking nut (9) and remove the
mincing disc (17), blade (18) and worm (19).
•
Check all parts are clean.
•
After cleaning, re-assemble the grinder.
Insert the worm (19) into the grinder body
and place the blade (18) on the square
portion of the feed screw. Then place the
required mincing disc (17) over the blade
making sure the 2 tabs fit into the slots in the
grinder body.
•
Fit the locking nut (9) onto the grinder
assembly and tighten by hand or spanner.
Take care to avoid over-tightening.
•
Insert the end of the grinder assembly into
the connector (2) and tighten the locking
screw (10) by hand or with the spanner
provided. Take care to avoid over-tightening.
•
Fit the tray (6) into the grinder assembly. The
tab on the tray fits into the slot in the grinder.
ENGLISH
7
Advertisement
Table of Contents
